Systems Delta 8
Selective Coating / Dispensing System The Delta 8 is a robotic selective coating and dispensing system, providing maximum work area flexibility to perform a wide variety of applications.
Ideal for selective coating, potting, bead and meter-mix dispensing applications, the Delta 8 is conceptualized for maximum flexibility and can also be configured for custom assembly applications. Maintaining the preferred features of previous work cells, the Delta 8 features a robust three-axis overhead motion platform suitable for in-line or batch operations. Improved structural and rigidity have been added for robustness and easier access. The Delta 8 has many options and integrated features including:
Specifications
Work area
1 Valve / Tool: |
Gantry system design Brushless, closed loop, DC servo motors with optical encoders and optical encoders and ball screw slides on all axes |
XYZ Repeatability 25 micron (0.001″) |
Resolution 5 micron (0.0002″) |
Maximum Acceleration 0.5g |
Footprint 973 mm x 1270.0 mm x 2350.9 mm (38.31″ x 50.0″ x 92.56″) |
Power 120V, 220V, 50-60 HzAir Supply 80 psi dry, Unlubricated air |
Software Programming PathMaster® software With offline image import capability |
XYZ Specifications:
Precision ball screw slides
Gantry System: Brushless DC servo motors
XYZ Repeatability: ±25 microns (±0.001″)
Maximum Speed (XYZ): 670 mm/sec (27.6″/sec)
Maximum Acceleration: 0.5g
Resolution: 5 microns (0.0002″)
Load Capacity: 11.36 kg (25 lbs.)
Conveyor Type: Flat belt or chain
Handling:
Minimum conveyor width: 50 mm (1.97″)
Maximum conveyor width: 500 mm (19.685″)
Upper joint clearance: 50mm (1.97″) Standard 100mm (3.94″) Optional
Lower joint clearance: 100mm (3.94″)
Edge gap: 4.7 mm (0.185″)
Transport Height: 940 mm – 965 mm (37″ – 38″)
Communication Protocol: SMEMA
Conveyor Options: Lift and locate, through hole pin, under board support
Conveyor Speed: Up to 24.4m/min (80 ft/min)
Process Flow: Programmable right to left or left to right, bidirectional
Weight Limit: 5 pounds (belt), 15 pounds (chain)
Fluid Applicators: Examples of Valves in Listed Category
Spray Valves: FCS300-ES, FCS300-R/-F, FC100-CF
Dispense Valves: FC100-MC, FCM100, FC300
Jetting Valve: JDX
Auger Valve: SV200, SVX
Progressive Cavity Valve: VPX-450
Material Feed Options
Syringe (1-55cc)
Cartridge feed (6 – 20 oz.)
Pressure vessel
Drums, totes.
© All rights reserved AB Electronic Devices | Legal notice | Privacy policy | Cookie Policy | Shipping and returns policy | Contact