PVA | Selective Varnishing Valve | FCM100

FCM100 is ideal for any low viscosity application, encapsulants, varnishes and micro beads or bead dispensing project. The FCM100 “drives” precise shots of fluid onto a substrate, achieving accurate patterns at a high speed, which do not require Z-axis adjustments. The FCM100 is compatible with all PVA platforms.

VALVE SPECIFICATIONS

Dimensions 152 mm x 19 mm x 19 mm(6.00 ” x 0.75″ x 0.75″)

Minimum Shot Size 0.83 l

Minimum Line Width 0.25 mm (0.010 “)

Minimum Inside Diameter Orifice 0.08 mm (0.003 ” )

Viscosity Range 1 cps – 20.000 cps

Air pressure 60to 100 psi

Fluid working pressure 1-100 psi

Components Stainless steel, Teflon®, Kalrez®

The FCM100 is available in the following configurations:

FCM100-22G
Non-contact Micro dispensing valve with tip 22g

FCM100-25G
Contactless Micro dispensing valve with tip 25g

FCM100-28G
Contactless Micro dispensing valve with tip 28g

FCM100-30G
Contactless Micro dispensing valve with tip 30g

FCM100-32G
Contactless Micro dispensing valve with tip 32g

FCM100-33G
Contactless Micro dispensing valve with tip 33g