AD101 Storage and drying cabins

AD-101

Features:

• Maximum 10 sliding and removable shelves.
• Desk cabinet with one door.
• Capacity of ~250 liters.
• Dimensions: 775(H) x 700(W) x 750(D)

Otheroptions:

– Larger 6-door cabinet, AD-606XL = 2100(H) x 1400(W) x 1150(D)

– 4-door cabinet, AD-404 = 1245(H) x 1400(W) x 750(D)

– Convection heater for faster drying of components, PCBs, etc.Static dissipative EVA mats. Static dissipative powder coating. Lockable doors. Vertical supports for component rolls. Stainless steel fixed shelves.
– Fixed telescopic shelves.

– Status light towers.

– Sound alarm.

– Pass through system, with front and rear doors.

– Data logging software, with memory or in real time.

– Refrigerated cabinets.

Nitrogen cabinets.

Any number of doors (e.g. 9 or 16 doors).

Our cabinets are used in a wide variety of applications involving moisture removal and dry storage. The primary industry sector that installs Mekko enclosures is the electronics manufacturing industry, where components and substrates must be protected from the damaging effects of moisture.

Enablescompliance with IPC/JEDEC D-STD-033standards, which details recommendations for the handling, shipping and use of surface mount devices sensitive to moisture and re-melting.
Ifsurface mount components absorb ambient moisture, and are then exposed to high temperatures, such as in remelting furnaces (convention, infrared, vapor phase or hot air repair tools), then the absorbed moisture expands rapidly, causing internal stresses in the devices. The resulting stresses can cause internal or external cracking, delamination and internal corrosion.

Eliminate the “popcorn popping” effect and micro-cracking of ICs and BGAs during reflow by using Active Desiccant storage and drying for components instead of baking.The drying of the components resets the in-plant time clock of the components to zero.

Active Desiccant booths are the best solution for storage and drying.

• Unique costs: The booth and the electrical consumption.
• No need for extra consumables or other services to operate the unit.
• Recurring costs are only about 75 Euro/year.

Our booths are equipped with a new desiccant rotor system that incorporates our “MTX-Flow” technology. This new development is more efficient and faster than our competitors. This unit is installed inside the cabinet to maintain internal humidity between 1% and 3% relative humidity.

Benefits of the Active Desiccant system:

– No need for humidity bags, nitrogen or compressed air.

– Less complicated than baking: reduces oxidation.

– Can use low temperature packaging.

– Suitable to meet IPC/JEDEC J-STD-033C standard.

– Internal temperature and humidity dials included.

– No “off” time. The desiccant will always be absorbing moisture.

– Desiccant that is permanently self-healing at the molecular level.

– Fast recovery time after door opening (2 minutes).

– Very accurate humidity dial: +/- 1% relative humidity (usually +/- 3% in our competitors!).