Manual Component Counter | County | Olamef

AXIAL AND RADIAL COMPONENTS

COUNTY EVO

The COUNTY EVO Component Counter is an instrument that counts axial and radial taped components.  With the SMD adapter (8301.018) you can also count SMD components.
The counter counts in both directions (left to right and vice versa).
It is equipped with a divider from 1 to 19 and a totalizer mode or preset mode with an alarm that indicates when the desired component number has been reached.

The County EVO is available in two versions, one with a rechargeable battery that can upload data to a PC and printer, with clock and memory for 500 data (8301.084 for 110V and 8301.082 for 220V) and one without battery (8301.083 and 8301.081 for 110V).

   Maximum count value: 899999 counts
Minimum terminal diameter: 0.4mm
Axial component width on spool: 55 – 110mm
Radial component width on spool: 18mm max.
Maximum component diameter: 14mm
Display: 4 digits. Digit height 13mm
Dimensions: 240x130x110mm
Weight: 1.8Kg

8301.081 County EVO 220V, 50-60Hz
8301.082 County EVO 220V, 50-60Hz with rechargeable battery, output for printer and PC, input for bar code scanner, clock
8301.083 County EVO 110V, 50-60Hz
8301.084 County EVO 110V, 50-60Hz with rechargeable battery, output for printer and PC, input for bar code scanner, clock

8301.023: Reel stand complete for axial and radial components (1 pc.) 8301.025: Handle for reel holder (1 pc.)
8301.025: Handle for reel holder (8301.023)

8301.018: SMD adapter for County
8301.028: Spool holder for SMD components (1 piece) 8301.030: Handle for reel holder (1 piece)
8301.030: Handle for 8301.028

8301.031: External counting head with 1m cable
8301.032: External counting head mounted on tape guide for Olamef machine TP6/A
8301.039: Cable for motorized Olamef machines

8301.155: Barcode reader with spiral cable
8301.095: Thermal label printer
8301.096: 57x51mm, roll of 1360 labels

AXIAL AND RADIAL COMPONENTS

The COUNTY Component Counter comes ready to count axial and radial components.  To count radial components, simply remove the adjustable guide and turn it over so that the flat side is in front of the optical head. This flat side will guide the body of the radial components.
Before starting to count, it is necessary to indicate the number of terminals each component has by using the up and down arrows on the counter display.  Up to 10 terminals can be indicated per component.