MBTech | NC25 | PCB Cleaner

NC25 consists of:

A stainless steel chassis to be built on a ship and equipped with 2 doors: 1.

1. a first one at the top of the front face giving access to the loading area
2. Another at the top of the rear face giving access to the unloading area

• A control panel with color display and on-screen keyboard on the right side of the machine.
• A transfer system with synchronized chains with three motor phases and frequency converter allowing the transfer of support frames to each operation of the cleaning process.
• A gravity conveyor system for loading and unloading.
• A stainless steel double cleaning tank (T1 and T2) with isolation valves (V1 and V2) and a drain valve. Liquid returns to the top of the tank through SL1
• .A double stainless steel pre-rinse tank (T3 and T4) with isolation valves (V4 and V5).
• A conductivity meter(COND1) controls water quality when it returns. This tank can be in open or closed loop.
• A double stainless steel rinse tank (T5 and T6) with isolation valve (V6 and V7). Conductivity meters (COND2) check water quality when returning. This tank can be in open or closed loop
• An aluminum drying tank (T7) with forced convection system and vacuum pump (VP).
• Acombined filtering system to the cleaning tank (F1 and F2) with two pumps (P1 Magnetic DrivenCentrifugal P2) and isolation valve V8 used when operating the changing filter F2.
• In option, a DI water production and regeneration system connected to the 2 rinse tanks.
• A system of spray arms to create an air knife (SL2, SL3, SL4 and SL5).
• A pneumatic system with air treatment, solenoid valves (EV1, EV2, EV3 and EV3) and distributors.