Olamef

Axial and Coaxial Component Preformers | TP Series | Olamef

Name: Axial and Coaxial Component Preformers | TP Series | Olamef | AB Electronic Devices
SKU: TP

Reference: TP

TP6

Machine for cutting and bending axial components. The standard version (20.OL01 or TP6/1) designed for end fittings with diameters
from .015 – .051 ” (0.4-1.3m m). Other versions are available for various applications; either requiring a bend very close to the body or for very thick lugs (up to .055″ or 1.4 mm)

. TP6 Spec PDF

TP6/M The TP6 machine can be connected to Motor-98 for automation.

COMPONENT BODY GUIDES

When it is necessary to bend too close to the body or in the case where components are not taped with the component body properly centered,

The use of body guides are a great help. Body guides are used in place of belt guides.

More Information on Body Guides PDF

We also offer the PR3 hand tool that bends axial components and other electronic component termina lcutting and preforming tools.

The following video shows the TP6/EC machine in operation.

The TP6/EC is the Economy version of the TP6 and works exactly the same.

The only difference is that the Economy machine cannot be motorized

and cannot use the loose parts feeder.

TP6/PR-B This machine cuts, bends and forms axial components. The shape obtained keeps the body of the component away from the board. No dies are required. Terminal diameters should be between the ranges: .039-.055″ (1-1.4mm). TP6/PR-B Specs PDF
TP6/PR-F This machine cuts, bends and forms axial components. Three versions are available depending on the diameter of the component terminals: 1- TP6/PR-F/1 – .019-.035 ” (0.5-0.9mm) 2. TP6/PR-F/2 – .031-.039 ” (0.8-1mm) 3. TP6/PR-F/3 – .039-.051 ” (1-1.3mm) Various dies are available for each version. The TNS is always included with this machine.. TP6/PR-F Specs PDF
TP6/V This machine cuts and bends axial components for vertical mounting. Two main versions are available: one for components with terminal diameters of .019-.031″ (0.5-0.8mm). The second .031-.051″ (0.8-1.3mm). TP6/V Specs PDF
TP6/V-PR This machine cuts, bends and forms axial components for vertical assembly. The resulting preforming locks the component to the PCB keeping it away from the PCB. It can be used for components with terminal diameters from .019-.031 ” (0.5-0.8mm). Pitches .100 ” (2.54mm) and .200 ” (5.08mm) are available. TP6/V-PR Specs PDF
TP6/S Machine for cutting, bending and forming axial components for SMD assembly. This is a special machine and it is necessary to obtain all dimensions when ordering. TP6/S Specs PDF TP6/PR-B/A TP6/PR-B machine with Motor-98 and CS10 loose parts feeder. TP6/PR-F/A TP6/PR-F machine with Motor-98/A and CS40 loose parts feeder. TP6/V-PR/A TP6/V-PR machine with Motor-98/A and CS20 loose parts feeder. TP6/S/A TP6/S machine with Motor-98 and CS10 loose parts feeder TP6/V-A TP6/V machine with Moto-98 and CS30 loose parts feeder. TP6/A Machine TP6 machine with Motor-98 and CS10 loose parts feeder See other available accessories. CS10 video. If you don’t want or can’t justify buying a spare motor and feeder, but still have loose components? and a loose parts feeder, but you still have loose components? We have available Loose Component Guides that have been modified to facilitate the feeding of low volumes of loose parts. low volumes of loose parts. Feeding is manual and one part at a time:

Axial and Coaxial Component Preformers | TP Series | Olamef

You may also be interested in